Service mode, G2 adjustment – Barco R9002328 User Manual
Page 123

SERVICE MODE
R5975059A BARCOVISION 708 200498
SERVICE
MODE
SERVICE MODE
R5975059A BARCOVISION 708 200498
SERVICE
MODE
9-18
9-18
Select with ê or é
then
G2 Adjustment
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
A safety notice will be displayed on
the screen as it is necessary to open
the top cover to adjust the G2.
Item is password protected.
Highlight 'G2 adjust' with the control
disc and press ENTER to continue.
ENTER selects the G2 adjustment.
EXIT returns to the Common settings menu.
ADJUST returns to the Operational mode.
'G2 adjustment should be performed
by BARCO personnel, or BARCO
authorized dealers'.
If you are qualified, press
ENTER to
continue. If not qualified, press EXIT to
return to the Common settings menu.
Further description of the G2 adjust-
ment is given in the Installation manual.
G2 ADJUSTMENT SHOULD BE
PERFORMED
BY BARCO PERSONNEL,
OR BARCO AUTHORIZED
DEALERS.
IF QUALIFIED, PRESS
IF NOT,
SAFETY
NOTICE
RISK OF ELECTRICAL SHOCK
Select with ê or é
then
G2 Adjustment
COMMON SETTINGS
G2 ADJUSTMENT
CRT RUN IN CYCLE
PROJECTOR WARM UP
CRT DRIVE MODE
A safety notice will be displayed on
the screen as it is necessary to open
the top cover to adjust the G2.
Item is password protected.
Highlight 'G2 adjust' with the control
disc and press ENTER to continue.
ENTER selects the G2 adjustment.
EXIT returns to the Common settings menu.
ADJUST returns to the Operational mode.
'G2 adjustment should be performed
by BARCO personnel, or BARCO
authorized dealers'.
If you are qualified, press
ENTER to
continue. If not qualified, press EXIT to
return to the Common settings menu.
Further description of the G2 adjust-
ment is given in the Installation manual.
G2 ADJUSTMENT SHOULD BE
PERFORMED
BY BARCO PERSONNEL,
OR BARCO AUTHORIZED
DEALERS.
IF QUALIFIED, PRESS
IF NOT,
SAFETY
NOTICE
RISK OF ELECTRICAL SHOCK