Barco R9002328 User Manual

Page 59

GUIDED ADJUSTMENT MODE

R5975059A BARCOVISION 708 200498

GUIDED ADJUSTMENT MODE

R5975059A BARCOVISION 708 200498

7-6

GUIDED

ADJUSTMENT

MODE

7-6

GUIDED

ADJUSTMENT

MODE

Picture tuning

Depending on the source type (video, S-Video, RGB(S) analog with composite

or Tri-level sync, component input with composite or Tri-level sync) the picture

tuning menu offers the possibility to toggle :

For Video, S-Video or Component video sources :

- The Synchronisation speed

- The Line Doubler feature (option)

- Decoding (for NTSC signals)

- Chroma delay (for PAL/SECAM signals)

For RGB analog or component input with composite or tri-level sync sources:

Sync Fast/Slow toggle

Highlight Sync by pushing the

control disc up or down and

press ENTER to toggle between

FAST and SLOW

Note : SYNC is normally used in

the SLOW position. The FAST

position is used to compensate

for unsteady sync pulses from

older video playback equip-

ment.

Hint : when the line doubler

feature is ON (active), toggle

the sync to FAST.

ENTER toggles between SLOW and FAST.

EXIT returns to the Guided Adjustment menu.

Line Doubler (option)

Line doubling is only possible for Video, S-Video,RGB or Component Video

images on standard line frequency.

To eliminate the video line patterns and to improve the image stability the line

doubler has to be switched on. The line doubler is default set in the ON position

when starting up for the first time. The setting of the line doubler will be saved

together with the source number.

Hint : when the line doubler feature is ON (active), toggle the sync to FAST.

When a bad video tape has to be displayed, switch off the line doubler feature

to obtain a stable image.

PICTURE TUNING

Select with é or ê

then to accept

to return

SYN / FAST

CHROMA DELAY : PAL

CONTINUE