Barco R9002328 - Manual (Page 139)

APPENDIX B : ORBITING
APPENDIX
B
: ORBITING
APPENDIX B : ORBITING
APPENDIX
B
: ORBITING
R5975059A BARCOVISION 708 200498 R5975059A BARCOVISION 708 200498 B-2 B-2
Master/slave toggle
Highlight 'CHANGE TO SLAVE'
with the control disc and press
ENTER to set the projector as Slave.
Highlight 'CHANGE TO MASTER'
with the control disc and press
ENTER to set the projector as Mas-
ter.
Orbiting ON/OFF toggle
(only in Master Orbiting)
Highlight 'MODE : ON' with the
control disc and press ENTER to
set the ORBITING OFF.
Highlight 'MODE : OFF' with the
control disc and press ENTER to
set the ORBITING ON.
ENTER toggles between mode on and off.
EXIT returns to the Path Selection menu.
to return.
SELECT WITH é OR ê
THEN
DEVIATION ADJUST :
VERTICAL WITH é OR ê
HORIZONTAL WITH ç OR è
to return.
SELECT WITH é OR ê
THEN
DEVIATION ADJUST :
VERTICAL WITH é OR ê
HORIZONTAL WITH ç OR è
MASTER ORBITING
to return.
SELECT WITH é OR ê
THEN
DEVIATION ADJUST :
VERTICAL WITH é OR ê
HORIZONTAL WITH ç OR è
MASTER ORBITING
SLAVE ORBITING
CHANGE TO SLAVE
MODE: ON
SPEED: FAST
ADJUST DEVIATION
CHANGE TO SLAVE
MODE: ON
SPEED: FAST
ADJUST DEVIATION
CHANGE TO MASTER
ADJUST DEVIATION
Master/slave toggle
Highlight 'CHANGE TO SLAVE'
with the control disc and press
ENTER to set the projector as Slave.
Highlight 'CHANGE TO MASTER'
with the control disc and press
ENTER to set the projector as Mas-
ter.
Orbiting ON/OFF toggle
(only in Master Orbiting)
Highlight 'MODE : ON' with the
control disc and press ENTER to
set the ORBITING OFF.
Highlight 'MODE : OFF' with the
control disc and press ENTER to
set the ORBITING ON.
ENTER toggles between mode on and off.
EXIT returns to the Path Selection menu.
to return.
SELECT WITH é OR ê
THEN
DEVIATION ADJUST :
VERTICAL WITH é OR ê
HORIZONTAL WITH ç OR è
to return.
SELECT WITH é OR ê
THEN
DEVIATION ADJUST :
VERTICAL WITH é OR ê
HORIZONTAL WITH ç OR è
MASTER ORBITING
to return.
SELECT WITH é OR ê
THEN
DEVIATION ADJUST :
VERTICAL WITH é OR ê
HORIZONTAL WITH ç OR è
MASTER ORBITING
SLAVE ORBITING
CHANGE TO SLAVE
MODE: ON
SPEED: FAST
ADJUST DEVIATION
CHANGE TO SLAVE
MODE: ON
SPEED: FAST
ADJUST DEVIATION
CHANGE TO MASTER
ADJUST DEVIATION