Launching the eks web interface, Manual eks electronic-key adapter profinet – EUCHNER EKS FSA with PROFINET interface User Manual
Page 40
Manual EKS Electronic-Key Adapter PROFINET
Seite 40/44
Subject to technical modifications
109283-01-04/10
9.2 Configuring the Electronic-Key adapter via the web interface
The Electronic-Key adapter can be configured with a web browser.
If you want to operate the Electronic-Key adapter with a self-defined DCP name, you can configure the device
using a PC. A PROFINET control system is not required during this process. This is the fastest method,
particularly if several devices have to be configured. The configuration PC must meet the following
requirements:
f Network card (10Base-T or 100Base-TX)
f Web browser (e.g. Internet Explorer)
f Java and Java Script must be activated in the security settings of the browser.
f Java Runtime Environment in Version 1.5.0 or higher must be installed.
f If the configuration PC features a firewall, it may be necessary to enable the EKS Electronic-Key adapter as
a trustworthy application. Refer to the firewall documentation for further information.
Launching the EKS web interface
1. Open a browser window and enter the default IP address (
essary, first reset to
the default IP address (see section 0 ).
f The
Information screen of the EKS web interface is now displayed.