EUCHNER EKS FSA with PROFINET interface - Manual (Page 13)

Manual EKS Electronic-Key Adapter PROFINET
109283-01-04/10 Subject to technical modifications Page 13/44
4.3 Pin assignment
4.3.1 Connection socket for PROFINET interface
The connection on the Electronic-Key adapter is realized as an RJ45 (8P8C) socket corresponding to ISO IEC
61754-24.
Pin Function
1 Transmit Data + (TD+)
2 Transmit Data - (TD-)
3 Receive Data + (RD+)
6 Receive Data - (RD-)
4.3.2 Plug-in screw terminals for power supply
Information!
The coded plug for the connection of the power supply is included with the Electronic-Key adapter.
Pin Designation Function
1 2 3
1 UB Power supply DC + 24 V
2 0V Power supply DC 0 V Coded plug, 3-pin
with screw terminals
Conductor cross-section 0.14 ... 1.5
mm² 3 Function earth Electrically connected to the housing
Tightening torque 0.22 Nm
4.3.3 Plug-in screw terminals for outputs LA1/LA2 and LB1/LB2 (EKS FSA only)
Information!
The coded plug for connection of the outputs is included with the Electronic-Key adapter.
Channel Pin Function
1
Normally open contact
channel LA
LA
2
Coded plug 2 x 2-pin
1 with screw terminals
Normally open contact
channel LB
LB Cond. cross-section 0.14 … 1.5 mm²
Tightening torque 0.22 Nm 2