4 dip switch settings, 1 dip switch s1, Manual eks electronic-key adapter profinet – EUCHNER EKS FSA with PROFINET interface User Manual
Page 14
Manual EKS Electronic-Key Adapter PROFINET
Seite 14/44
Subject to technical modifications
109283-01-04/10
4.4 DIP switch settings
The device has three DIP switches (S1, S2, S3).
DIP switch
Function
S1
S1.1 … S1.4; write and read settings
(4-fold)
S2.1 …
S2.8; setting for a fixed DCP name (dependent on the setting of S3)
S2
(8-fold)
S3
S3.1 …S3.4; settings for network connection and service
(4-fold)
Information!
The settings are only applied when the power supply is switched on.
4.4.1 DIP switch S1
DIP
Function
Factory setting
switch
S1.1
ON = write protection for Electronic-Key read/write
OFF
S1.2 No
function
OFF
S1.3 No
function
OFF
S1.4 No
function
OFF
Information!
It is imperative that all switches without a function (S1.2, S1.3 and S1.4) are set to OFF! In this way
problems with any functions added in the future will be avoided.