EUCHNER MGB-LxxB-PNA-xxx (PROFINET) with Data Structure Type A - Manual (Page 2)

Operating Instructions Safety System MGB-L..B-PNA-... (PROFINET)
2
Contents
Correct use 3
Exclusion of liability and warranty 4
General safety instructions 5
Function 6
Interlocking module MGB-L0.B-PNA 6
Locking module MGB-L1.B-PNA and MGB-L2.B-PNA 6
Control of the guard locking 7
System overview 11
Evaluation module MGB-L.- 12
Handle module MGB-H-... 12
Escape release MGB-E-... (optional) 12
Dimension drawing 12
Mechanical release (only systems with guard locking) 13
Lockout mechanism 14
Escape release (optional) 14
Mounting 16
Mounting color cover 16
Changing the actuating direction (here: from right to left) 18
Controls and indicators 20
Protection against environmental effects 21
Electrical connection 21
Connections on bus module 22
Setup 23
Integrating into PROFINET and PROFIsafe 23
Replacement of an MGB system without programming device 24
System reset to factory settings 24
Teach-in operation (only for MGB unicode) 25
Mechanical function test 26
Electrical function test MGB-L0... 26
Electrical function test MGB-L1.../-L2... 26
PROFINET data bytes (unsafe input/output area) 27
PROFIsafe data bytes (safe input/output area) 28
Diagnostic messages of the MGB system 29
System status table 31
Technical data 32
Troubleshooting 33
Latching fault when actuating the escape release 33
Fault reset 33
Inspection and service 34
Declaration of conformity 35