ERICO TDX150 Series - Manual (Page 4)

34600 Solon Road
Solon, Ohio 44139
(440) 248-0100
www.erico.com
TDX Series 10 Year Limited Warranty.
T his Product has a limited warranty to be free from defects in materials
and workmanship for a period of ten (10) years from the date of dispatch
from the Manufacturer. This warranty includes, but is not limited to,
damage due to over-voltages, damage due to an abnormally high number
of surges and damage due to direct or indirect lightning strikes.
THE PURCHASER ACKNOWLEDGES THAT LIGHTNING IS A
NATURAL EVENT WITH STATISTICAL VARIATION IN
BEHAVIOR AND ENERGY LEVELS WHICH MAY EXCEED
PRODUCT RATINGS, AND THAT 100% PROTECTION IS NOT OFFERED AND
CANNOT BE PROVIDED FOR. IN ADDITION, THE PURCHASER ACKNOWLEDGES
THESE RISKS AND HAS DETERMINED THAT THEY ARE ACCEPTABLE FOR THE
APPLICATION OF THE PRODUCT. THE PURCHASER IS SOLELY RESPOSIBLE FOR
ENSURING THAT THE PRODUCT IS INSTALLED IN STRICT ACCORDANCE WITH
THE MANUFACTURER’S INSTRUCTIONS, AMERICAN NATIONAL STANDARD
ANSI/IEEE C62.41.2 AND ALL RELEVANT NATIONAL ELECTRICITY AND SAFETY
STANDARDS.
The Manufacturer’s liability is limited to the repair or replacement of the product (at the
Manufacturer’s sole option) which, in the Manufacturer’s judgment, has not been abused,
misused or altered. The supply of replacement Products may be conditional upon the
Manufacturer performing a site power quality audit and implementation by the Purchaser of
any resultant recommended corrective measures.
EXCEPT AS STATED IN THE FIRST PARAGRAPH ABOVE, THE MANUFACTURER
MAKES NO WARRANTIES, EXPRESS, IMPLIED OR STATUTORY, AND
SPECIFICALLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
The scope of this warranty does not provide for claims against the Manufacturer for
consequential damages or loss of operations or service or profits. This warranty does not
indemnify the Purchaser from any consequential claims by a third party for damages or loss of
operations or service or profits. The giving of, or failure to give, any advice or
recommendations by the Manufacturer shall not constitute liability.
Customers should contact their nearest Manufacturer’s agent to obtain a Return Material
Authorization (R.M.A.) which must be clearly marked on the outside of the shipping container
as well as on the unit being returned. It should then be forwarded, freight brokerage, and duty
prepaid, to: ERICO, Inc. 34600 Solon Road • Solon, Ohio • (440) 248-0100 along with a note
describing the problem. Proof of purchase should also accompany the request for warranty
repair or replacement. Return freight is customer collect.