Environmental Express AutoBlock II - Manual (Page 36)

36
Automatically raise samples for injection of reagents and sample cooling. For
heating the samples the elevators automatically lower.
6- Safety
All standard safety features apply. See section 9 for details.
7- Progress indicators
Minutes-elapsed and minutes-remaining are displayed and updated throughout
the procedure. In addition, the exact step the AutoBlock is performing is
highlighted in blue in the Method Procedure box.
Once the digestion method is completed, the Status box will display Method
Done.
8- Temperature
Graphite temperature is continually displayed in the upper left-hand corner of
the screen. See section 5.3 for additional information
7.6 Creating a Custom Method
In the Method mode, press new in the method mode. Press the “+” (plus) button
on the middle right hand side. This will bring you to the automated method
preparation screen
Custom Method Development
Pressing the arrow in the reagent box will drop down a list of reagents that have
been programmed to run on this unit. See section 6 for adding reagents.
7.7
Commands