ElmoMC ExtrIQ Digital Servo Drives-Panther - Manual (Page 74)

Panther Installation Guide Technical Specifications
MAN-PANIG (Ver. 1.302)
www.elmomc.com
74
4.5. Power Ratings for 800 V models
Feature Units 8/800 12/800 R11/800 R16/800
Minimum supply voltage VDC S option in P/N*: 95+
Nominal supply voltage VDC 560 for 400 VAC
680 for 480 VAC
Maximum supply voltage VDC 780
Maximum continuous power
output
kW 5 7.5 7 10
Efficiency at rated power (at
nominal conditions)
% > 98
Auxiliary supply voltage option VDC 18 V to 30 V
Only for Control Supply S option Model
Auxiliary power supply VA 7
Continuous current limit (Ic)
Amplitude sinusoidal/DC
trapezoidal commutation
A 8 12 11 16
Sinusoidal continuous RMS
current limit (Ic)
A 5.7 8.5 7.8 11.3
Peak current limit A 2 x Ic No peak
Weight g (oz) 250 g (8.8 oz)
Dimensions mm
(in)
111 x 76 x 30 (4.33" x 2.95" x 1.18")
Digital in/Digital out/ Analog in 6/4/1
Mounting method PCB Mounted
The following notes apply to all the above Power Rating models 400, 700, and 800 V.
*See page 19 for details on the part number. The S option appears in models where there is a
24 V control supply. If there is no S option, the control power supply operates from the main
power.
Note on current ratings: The current ratings of the Panther are given in units of DC amperes
(ratings that are used for trapezoidal commutation or DC motors). The RMS (sinusoidal
commutation) value is the DC value divided by 1.41.