Blodgett 1400 SERIES - Manual (Page 12)

Installation
8
Oven Assembly
DECK INSTALLATION
1. Remove the decks from the carton package.
NOTE: Handle cordierite shelves carefully to
avoid damage.
2. Open the oven door and remove the center
element assembly. The assembly is removed
by puling forward and unplugging.
3. Install one of the decks in the bottom position.
The deck should rest on the angles above the
element and should be positioned in contact
with the linerback.
4. Install the other deck in the center element asĆ
sembly on a flat surface. Reinstall the center
deck and element assembly in the oven. The
assembly is supported on four angle supports.
Bottom
Deck
Top Deck
Center
Element
Figure 6
LEVELING THE OVEN
1400 Series ovens are equipped with NSF listed
adjustable sanitary legs.
1. Level the oven side to side and front to back
by placing a spirit level on the base frame of
the lower section.
2. Adjust the leg feet in or out as necessary.