Blodgett 1400 SERIES - Manual (Page 10)

Installation
6
Oven Assembly
Before assembly and installation of the oven,
check that all components have been received. In
addition to the oven, legs, decks and/or other acĆ
cessories may be required.
Single Sections
D 4" (10 cm) legs are shipped inside the oven,
packed in a separate carton.
D The decks are individually packaged and seĆ
cured to the oven back.
Double Sections
D 4" (10 cm) legs are packed in lower sections.
D Spacer is shipped attached to the upper secĆ
tion.
D Securing plate to attach units together is loĆ
cated in the upper section.
D The decks are packaged with each section.
LEG ATTACHMENT
1. Tip bottom oven section backward.
2. Attach each of the four legs into the nuts seĆ
cured in the oven bottom.
3. Tighten each leg and adjust the leg feet to
approximately the same height.
NOTE: Final leg fet adjustment will be reĆ
quired during the leveling operation.
Figure 3