Assembly & setup, Unpack & inspect the rfd oven, If damaged during shipping – Despatch RFD Series User Manual
Page 23: Set up the rfd oven, Select oven location, Danger

RFD Oven Series
Owner’s Manual
A
SSEMBLY
&
S
ETUP
Version 1
23
Copyright © 2012 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
4.
Assembly & Setup
Assembly and Setup provides directions for unpacking and installing your RFD oven.
4.1. Unpack & Inspect The RFD Oven
Remove all packing materials or devices and thoroughly inspect the oven for any damage that
might have occurred during shipment.
Note the condition of the carton and plastic cover sheet inside the carton.
Observe all outside surfaces and corners of the oven for scratches and dents.
Check oven controls and indicators for normal movement, bent shafts, cracks, chips or
missing parts such as knobs and lenses.
Check the door and latch for smooth operation.
4.1.1. If Damaged During Shipping
If damage occurred during shipping:
1. Contact the shipper immediately and file a written damage claim.
2. Contact Despatch Industries (1-800-473-7373 or 1-952-469-8230 or [email protected])
to report your findings and to order replacement parts for those damaged or missing. Send a
copy of your filed damage claims to Despatch Industries (Despatch Industries, 8860 207
th
3. Street, Lakeville, MN 555044, USA).
4. Check the packing list to ensure you received all the specified components of the oven
system. Contact Despatch Industries to have any missing products forwarded to you.
5. Complete the warranty card and mail it to Despatch within 15 days after receipt of the
equipment.
4.2. Set up The RFD Oven
4.2.1. Select Oven Location
The Despatch RFD oven is designed to operate in an industrial setting.
Danger!
This equipment must be installed by a licensed electrician who
is experienced with combustion safeguard control systems and
understands the functions of an interlocking switch such as gas
pressure switches.
If any warning, danger, or information sign has been
damaged or lost, contact the customer service department of
Despatch Industries, Inc. for replacement.