Despatch RFD Series - Manual (Page 14)

S AFETY RFD Oven Series Owner’s Manual
14 Version 1
Copyright © 2012 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
2.2. Maintenance
Only qualified and trained personnel should perform maintenance or repair.
2.3. Electrical Power
Only qualified and trained personnel should perform electrical maintenance or electrical repair.
Danger!
High voltage present on this equipment, service by authorized
personnel only. Contact with energized electrical sources may
result in serious injury or death.

Before performing maintenance, disconnect all electrical power from the machine. Use a
padlock and lockout all disconnects feeding power to the machine.

Never clean or repair the oven when in operation.

Unauthorized alterations or modifications to RFD oven are strictly forbidden. Never modify
any electrical circuits. Unauthorized modifications can impair the function and safety of the
RFD oven.
2.4. Fire
Keep the RFD oven clean and free of scrap materials, oil or solvents to prevent the possibility of
fire. In the event of fire, follow these steps.
1. Leave door as is.
2. Shut off electricity.
3. De-energize the machine immediately by turning OFF the
DISCONNECT SWITCH .
4. Turn off the remote main disconnect (customer supplied disconnect).
5. Shut off fuel.
6. Call the fire department.
7. Stay away.
Danger!
Always disconnect all power before extinguishing a fire.
Attempting to extinguish a fire in a machine connected to
electrical power can result in serious injury or death.
2.5. Equipment Lockout Requirements
To prevent injury or equipment damage during inspection or repair, the RFD oven must be locked
out.