Despatch RFD Series - Manual (Page 11)

RFD Oven Series Owner’s Manual A BOUT T HIS M ANUAL
Version 1 11
Copyright © 2012 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
1.5.4. Power
Line voltages may vary in some geographies. If the line voltage for
your RFD oven varies more than 10% from the oven voltage rating,
electrical components such as relays and temperature controls may
operate erratically.

If the line voltage is lower than the oven voltage rating, heat-up
time may be significantly longer and motors may overload or
run hot

If the line voltage is higher than the nameplate rating, motors
may run hot and draw excessive amperage
Refer to the Electrical Specifications on your oven for the specifics
pertaining to your oven (Figure 2).
Model Volts
†
Amps Hertz
‡
Electrical Phase KW
RFD2-13 208 55.9
60 3
18
240 44.5 16
480 22.2 16
RFD2-19 208 55.9
60 3
18
240 44.5 16
480 22.2 16
RFD2-35 208 84
60 3
27
240 86 32
480 43 32
†
An oven designed for 240 volts (see oven nameplate) will operate satisfactorily on a minimum of 208
Volts, but will result in 25% reduced heater output. If your power characteristic is lower, contact Despatch
Industries.
‡
50 hertz electrical is available on all models.
Figure 2. Electrical Specification Label.