Dakota Ultrasonics CMX DL plus - Manual (Page 27)

CMX
DL+
High Performance Material & Coating Thickness Gauge
23
RF View Rectified (RECT) View
BSCAN View DIGITS View
In the upper left corner of each of the display photos above, is the repeatability
indicator. The repeatability indicator is represented by six vertical bars and
represents how repeatable the measurements are. In regular measurement mode,
the CMX
DL+
makes 8 measurements a second. In scan mode, the CMX
DL+
makes
200 measurements a second. If the coating mode option is activated, the CMX
DL+
makes 3 measurements a second in regular measurement mode and 65
measurements a second in scan mode. When the CMX
DL+
is idle, only the left
vertical bar will be displayed. However, when the CMX
DL+
is making a measurement,
four or five of the bars should be displayed on the repeatability indicator. If fewer
than four bars are showing, the CMX
DL+
is having difficulty achieving a stable
measurement and the thickness value displayed is potentially unstable.