Dakota Ultrasonics CMX DL plus - Manual (Page 122)

Dakota Ultrasonics
118
2) Use the UP and DOWN arrow keys to scroll through the sub menu items
until VIEW is highlighted.
3) Press the ENTER key to display a list of the color scheme options.
4) Press the UP and DOWN arrow keys to scroll through the material list until
the appropriate material is highlighted.
5) Press the ENTER key, followed by pressing the OK key, to overwrite the
current color scheme with the selected scheme.
6) Finally, press the MEAS key to return to the measurement screen and begin
taking readings.
10.7 DIM (color version only)
The CMX
DL+
color version has a built-in DIM feature to manage power more
effectively. This feature has adjustable time durations, until the power of the display
is dimmed and current draw reduced. The timer is constantly reset while the user is
making measurements, and is only activated when the gauge is idle for the duration
of time the DIM value is set for. This feature does not override the preset 5 min idle
power off feature in any way. However, if the gauge is turned on, set for a DIM of
120sec, and then left idle for 5 minutes, the CMX
DL+
will dim in 2 minutes, then power
off in 5 minutes. The procedures for adjusting the DIM time are outlined below: