COATS Extended Mobility (EMT) RunFlat Tires - Manual (Page 12)

DANGER
Explosion Hazard
Never inflate
tire above
manufacturer’s
recommended
pressure after bead
is seated.
DANGER
Explosion Hazard
A safety cage must be
used for bead seating
and inflation of
EMT/RunFlat Tires.
Never exceed 80 PSI to
seat beads on
EMT/RunFlat Tires.
B–2 Safety
The low-pressure sensors used on these tire/wheel
assemblies are very expensive to replace. Do NOT use
the bead loosener where it may come in direct contact
with the sensor. Do NOT use full strokes of the bead loosen-
er to avoid pushing the tire bead into the sensor. ALWAYS
check sensor position before starting any procedure.
Failure to follow DANGER, WARNING, and CAUTION
instructions may lead to serious personal injury or death
to operator or bystander or damage to property. Do not
operate this machine until you read and understand all the
DANGER, WARNING and CAUTION notations in this manual.
This tire changer may operate differently from machines
you have previously operated. Practice with a regular
steel wheel and tire combination to familiarize yourself
with the machine’s operation and function.
The tire changer must be properly operated and main-
tained to help avoid accidents that could damage the
unit and injure the operator or bystanders.
CAUTION
!
CAUTION
!
WARNING
!
CAUTION
!
This completes Section B.