Danger – COATS 5030 A/E Tire Changer User Manual
Page 13

Important: Always read and follow operating instructions.
• 9
Inflation
DANGER
NEVER exceed tire manufacturer’s recom-
mended air pressure. Tires can explode,
especially if inflated beyond these limits.
Keep hands, arms, and entire body back
from inflating tire. Avoid distraction dur-
ing inflation. Check tire pressure frequently
to avoid over inflation. Excessive pressure
can cause tires to explode, causing serious
injury or death to operator or bystander.
1.
Make sure both beads are seated. When both
beads are seated, the tire is ready for inflation.
2.
Replace the valve core if it was removed.
3.
Depress the inflation pedal to position 2 to inflate
the tire. Check tire pressure frequently by removing foot
from pedal and checking the gauge on the tower. Avoid
overinflation.
NOTE: Release air pressure from the tire by pressing
the manual release valve button (inflation hose must be
attached to the valve stem).
Figure 15 - Stand Back During Beat Seat and Inflation
Explosion Hazard
Never exceed 40 PSI while
seating beads. If you use
more than 40 PSI always
use safety cage.
Remember R.I.M.
(see page iv and back cover)
Explosion Hazard
Never infl ate tire
above
manufacturer’s
recommended
pressure after
bead is seated.
DANGER
DANGER
Manual Release V
alve