COATS 6401 Computer Truck Wheel Balancer - Manual (Page 8)

2 • COATS 6401 Truck Wheel Balancer
Direct Drive
Specifications
• Cycle time . . . . . . . . . . . . . . . . .12 seconds (avg.)
• Max Tire Diameter . . . . . . . . . . . . . . . . .46 inches
• Max Tire Weight . . . . . . . . . . . . . . . . .200 pounds
• Rim Diameter . . . . . . . . . . . . . . . . . . . .16 inches
• Wheel Width Range . . . . . . . . . .4.5 to 25 inches
• Balancing Increments:
Truck Truck RV Car
Round Off Dynamic Static Dynamic Dynamic
Ounce 2.0 2.0 wt≤4.0; .5 .25
wt>4.0; 1.0 .5
Grams 50 50 wt≤100; 10 wt>55; 10
wt>100; 20 wt≤55; 5
• Resolution (Round Off Mode) . . .0.01 ounce, 1.4º
• Motor - Modified torque with 850 RPM rating,
forced air cooling, large housing for heat dissipa-
tion, and heavy duty insulation for high tempera-
ture applications
• Balancer Weight . . . . . . . . . . . . . . . . .900 pounds
• Shipping Weight . . . . . . . . . . . . . . .1,100 pounds
Standard Accessories
• 5/16 Allen Wrench
• Weight Hammer
• 6401 Threaded Stud
• Accessory Pegs
• Hood Springs
• Caliper
• Small Cone
• Medium Cone
• Large Cone
• Truck Cone
• Truck Cone Spacer
• Back Cone Spring
• Pressure Drum
• Hubnut Wrench, Large
• Hubnut Wrench, Small
• Hubnut
Optional Accessories
• Tire/Wheel Lift #0501: A roll-around hydraulic lift
for mounting tire and wheel assembly to the bal-
ancer
• Dayton Wheel Adapter for 20-22.5 Inches
• Dayton Wheel Adapter for 22-24.5 Inches
• Combi Adapter for Most Truck Wheels
• Hub
Features
• Exclusive Direct Drive System - No Belts or
Pulleys
• Will Balance Most Automotive, All Truck, RV and
Light Truck Wheels
• Backcone And Truck Cone Mounting Systems
• Single Spin Dynamic Two Plane Balance Or Static
Balance
• Vertical Wheel Mounting
• Hood Safety Interlock System
• Static, Car/RV And Truck Operating Modes
• Adjustable Control Panel
- Scratch and Solvent Resistant
- Large, Bright Digital Displays
- Easy-to-Read Position Indicators
- Large Keypad for Data Entry
- Easily Repositioned for Best Visibility
- Electronics Isolated from Motor Heat
- Automatic Memory and Program Check
• Automatic Rim Gauge Return
• Simple Calibration
• Removable Shaft Stud
• Oversized Weight Bins
• Built In Anvil for Hammering Weights
• "No Bolt-Down" Installation