COATS 575 Heavy Duty Tire Lift - Manual (Page 8)

8 • COATS Heavy Duty Tire Lift
Operation
WARNING
ALWAYS make sure the 575 Tire Lift is not
touching the wheel assembly before using
the wheel balancer. Personal injury or dam-
age to the unit could result.
CAUTION
Do not put your hand on the top of the
wheel during operation. Your hand could be
pinched between the wheel and the TOWER
ASSEMBLY.
CAUTION
Before moving the WHEEL TRAY, make sure
the BASE TRACK area is clear of debris.
575 Heavy Duty Lift Operation
1. Use HANDGRIP to slide the WHEEL TRAY back
away from the balancer.
2. Push the VALVE HANDLE downward; making sure
the WHEEL TRAY is completely lowered.
3. Roll the wheel assembly to load it onto the
WHEEL TRAY.
4. Push the VALVE HANDLE upward to raise the
wheel assembly; centering it with the balancer stub
shaft.
5. Use the HANDGRIP to slide the WHEEL TRAY for-
ward until the wheel assembly is on the balancer stub
shaft; ready to be mounted on the balancer.
6. Secure the wheel to the balancer using suitable
mounting adapters.
7. Push the VALVE HANDLE downward so the
WHEEL TRAY no longer contacts the wheel assembly.
8. Move the WHEEL TRAY back out of the wheel
balancer work area.
9. Balance the wheel.
10. Use HANDGRIP to move the WHEEL TRAY for-
ward; under the wheel assembly.
11. Push the VALVE HANDLE upward so the WHEEL
TRAY will support the wheel assembly.
12. Remove the wheel assembly from the balancer
stub shaft.
13. Use HANDGRIP to slide the WHEEL TRAY back
away from the balancer.
14. Push the VALVE HANDLE downward; making
sure the WHEEL TRAY is completely lowered.
15. Unload the wheel assembly by rolling it out of
the WHEEL TRAY.