Figure 3, Figure 4, Figure 5 – CiDRA Use of Foundation Fieldbus Protocol with SONARtrac Transmitters User Manual
Page 34
Copyright © 2010 CiDRA Corporate Services
Page A-2
20958-01 Rev 02
Prior to connecting the transmitter to the Fieldbus, the
Configurator will show a screen similar to the following:
Figure 3
NI-FBUS Configurator
Once connected, a process will start where an address will be
assigned to the transmitter. This may take few minutes. An
hourglass will appear on the device icon while this is being
done:
Figure 4
SONAR Icon With Hourglass
The display on the transmitter will display an ‘F’ to indicate it is
connected to a Fieldbus network:
Figure 5
Fieldbus Connection Indicated on Transmitter Display
Once the connection process is completed, the hourglass will
be removed: