chiliGREEN M770K - Manual (Page 193)

Attaching Other Displays B - 5
B
Configuring an External Display using the ATI Catalyst Control Center
Alternatively you can use the ATI Catalyst Control Center to configure any at-
tached displays.
1. Attach your external display to the external monitor port or HDMI-Out port, and
turn it on.
2. Go to ATI Catalyst Control Center (see “ATI Catalyst® Control Center” on page B - 2 ).
3. Select Displays Manager from the Graphics Settings Tree View pane.
4. Attached displays will appear in the Desktop and Display Setup box.
5. Right-click, the attached display icon to bring up the Display Mode options (see
“Using New Display Detected to Enable Extended Mode” on page B - 12 ).
6. Select an option from the menu, and click Yes to accept the settings.
7. Click OK to save the changes.
Detect Displays
Click Detect Displays
(button) to automati-
cally update the at-
tached display
information.
Configure the Display
Detection Option from
Display Options in the
Graphics Settings
Tree View pane. You
can configure the Cata-
lyst® Control Center
to manually or automati-
cally detect attached
displays.
Figure B - 4
Displays Manager
Right-click the attached
display icon and select an
option (Clone or Extend)
from the menu.