chiliGREEN M770K - Manual (Page 150)

Modules & Options
7 - 28 3.75G/HSPA Module
7
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn +
key combination (see “Keyboard -
Model C” on page 1 - 15 ) to toggle power to the 3.75G/HSPA module. When the
3.75G/HSPA module is powered on, the indicator will briefly be displayed.
Make sure you install the drivers in the order indicated in Table 4 - 1, on page 4 - 3 .
Note that exiting the application does NOT turn off the 3.75G/HSPA module.
• HSPA Modem Interface - See “HSPA Modem Interface Installation” on
page 7 - 33 for driver installation information and “HSPA Modem Interface”
on page 7 - 34 for instructions on using the HSPA Modem Interface.
• Mobile Partner - See “Mobile Partner Application Installation” on page 7 -
42 for driver installation information and “Mobile Partner Application” on
page 7 - 43 for instructions on using the Mobile Partner application.
3.75G/HSPA
Modules & System
Wake Up
Note that the 3.75G mod-
ules DO NOT support
system wake up on
3.75G/HSPA modem ac-
tivity.