chiliGREEN M770K - Manual (Page 117)

Upgrading The Computer
Upgrading the Optical (CD/DVD) Device 6 - 7
6
Upgrading the Optical (CD/DVD) Device
1. Turn off the computer, and turn it over and remove the battery.
2. Model A: Locate the RAM & CPU bay cover and remove screws - .
3. Carefully (a fan and cable are attached to the under side of the cover) lift up
the bay cover.
4. Carefully disconnect the fan cable , and remove the cover .
OR
5. Models B & C: Locate the hard disk bay cover and loosen screws & .
6. Remove the hard disk bay cover .
Fan Cable & Cover
Make sure you recon-
nect the fan cable
before screwing down
the bay cover. Note the
information on replac-
ing the RAM & CPU
bay cover in
“Cover
Pins” on page 6 - 12 .
Figure 6 - 5
Removing the RAM
& CPU Cover/HDD
Cover
4
1 3
4 5
1 2
3
5
1
3 2
Model A
Model B
4
2 1
3
Model C
2 1
3