chiliGREEN X8100 - Manual (Page 158)

Modules
7 - 22 PC Camera Module
7
PC Camera Module
Before installing the driver, make sure the PC Camera is on. Use the Fn + F11 key
combination or Touch Sensor Instant Key to toggle power to the to the PC Camera
module. When the PC Camera module is powered on, the
LED will be high-
lighted and the indicator will briefly be displayed. Make sure you install the
drivers in the order indicated in Table 4 - 1, on page 4 - 3 .
PC Camera Driver Installation
1.
Insert the Device Drivers & Utilities + User’s Manual disc into the CD/
DVD drive.
2. Click Option Drivers (button).
3. Click 2.Install WebCam Driver > Yes.
4. Choose the language you prefer and click Next > Next.
5. Click Finish to restart the computer.
6. Run the camera application program from the shortcut on the desktop (if the
hardware is turned off use the Fn + F10 key combination to turn it on
again).
Latest PC Camera
Driver Information
Check the Device Drivers
& Utilities + User’s Manu-
al disc and any accompa-
nying insert pages, for the
latest updated information
on the PC Camera driver,
which may override the in-
formation provided here.
PC Camera Display
The PC Camera applica-
tion software needs to be
run while the default note-
book LCD is the selected
display device.
After a camera picture is
obtained on the default
notebook LCD, you may
then use the Fn + F7 to tog-
gle through the display
modes (give the screen
time to refresh).