chiliGREEN X8100 - Manual (Page 142)

Modules
7 - 6 Setting Up SATA RAID Mode
7
10. This will now return to the main menu.
11. Select 6.Exit and press Enter, then press Y to exit the RAID configuration menu.
12. Make sure the Windows 7 OS DVD is in the DVD drive. and as the computer
starts up it will automatically boot from the Windows 7 OS DVD.
13. Click Next to continue installing the operating system as normal (see your
Windows documentation if you need help on installing the Windows OS).
14. Install the Windows drivers from the Device Drivers & Utilities + User’s Manual
disc as per Table 4 - 1, on page 4 - 3 (make sure you install the Intel Matrix driver
- see “Intel® Matrix Driver Installation” on page 7 - 7 ).
Figure 7 - 2
RAID Created
RAID Volumes:
ID
Name Level Strip Size Status Bootable
0 MyRAID RAID1(Mirror) N/A 111.7GB Normal Yes
Physical Disks:
Port Drive Model
Serial # Size Type/Status(Vol ID)
2 FUJITSU MHY2120B K404T812P22B 111.7GB Member Disk(0)
4 FUJITSU MHY2120B K404T7C2KJ14 111.7GB Member Disk(0)
Intel(R) Rapid Storage Technology - Option ROM - 9.5.0.1008
Copyright (C) 2003-09 Intel Corporation. All Rights Reserved.
[ MAIN MENU ]
[ DISK/VOLUME INFORMATION ]
[ ] - Select [ESC]-Exit [ENTER]-Select Menu
1. Create RAID Volume 4. Recovery Volume Options
2. Delete RAID Volume 5. Acceleration Options
3. Reset Disks to Non-RAID 6. Exit