AirLive WLA-9000AP - Manual (Page 95)

5. Web Management 2: System Configuration and Status
AirLive WLA-9000AP User’s Manual 88
„ Upgrade Firmware:
To update the WLA-9000AP firmware, first download the firmware from AirLive web
site to your local disk, and then from the above screen enter the path and filename of
the firmware file (or click Browse to locate the firmware file). Next, Click the Upgrade
button to start.
The new firmware will be loaded to your WLA-9000AP. After a message appears
telling you that the operation is completed, you need to reset the system to have the
new firmware take effect.
Do not power off the device while upgrading the firmware.
It is recommended that you do not upgrade your WLA-9000AP unless
the new firmware has new features you need or if it has a fix to a
problem that you’ve encountered.
5.1.8 Configuration Save and Restore
System Configuration -> Configuration Save and Restore
You can save system configuration settings to a file, and later download it back to the
WLA-9000AP by following the steps.
Step 1
Select Configuration Save and Restore from the System Configurations menu.