AirLive WLA-9000AP - Manual (Page 36)

4. Web Management: Wireless and WAN Settings
29 AirLive WLA-9000AP User’s Manual
mode you choose; only the applicable wireless settings for selected operation
mode are shown. For example; WAN port setting is available only for AP Router
and WISP Router mode, it will only be shown in those modes. To access wireless
settings, click on the “Setup” button within each operation mode. For explanation
on different wireless modes, please refer to Chapter 1. We will talk about
functions in this menu for this chapter.
„ System Configuration: All settings besides Wireless and WAN functions are in
this category. The system configuration including changing password, upload
firmware, backup configuration, settings PING watchdog, and setting management
interface. We will talk about this menu’s function in Chapter 5.
„ Device Status: This section for monitoring the status of WLA-9000AP. It provides
information on device status, Ethernet status, wireless status, wireless client table,
and system log.
„ Logout: Please make sure to Logout after you finish all settings.
4.2 Operation Modes (Wireless and WAN Settings)
The wireless settings of WLA-9000AP are dependant on the wireless operation mode you
choose. Therefore, the first step is to choose the operation mode. For explanation on
when to use what operation mode, please refer to Chapter 1.
When you select “Wireless Settings” in the welcome screen, or click on the “Operation
Mode” on the top menu; the following screen will appear: