AirLive WLA-9000AP - Manual (Page 94)

5. Web Management 2: System Configuration and Status
87 AirLive WLA-9000AP User’s Manual
„
PING Frequency means: "How often the CPE will PING". For example, it will PING
once every "1" minute.
„
Fail Tries means "How many times fails before the CPE will judge the PING failed".
For example "2" means the CPE will reconnect if the PING doesn't respond for 2 times.
When you set the Ping Frequency to every "2" minutes and Fail Tries to "2". It means the
CPE will ping every 2 minutes, after the second failure, it will reconnect.
Actions:
„ Reconnect: the WLA-9000AP will attempt to re-establish the connection. It is
recommend to use this option for WDS Bridge connection.
„ Reboot: the WLA-9000AP will do a power recycle.
5.1.7 Firmware Upgrade
System Configuration -> Firmware Upgrade
You can upgrade the firmware of your WLA-9000AP (the software that controls your
WLA-9000AP’s operation). Normally, this is done when a new version of firmware offers
new features that you want, or solves problems that you have encountered with the current
version.