AirLive AirMax DUO - Manual (Page 92)

4. Wireless and WAN Settings
AirLive AirMax DUO User’s Manual 84
Enable Client Isolation (Privacy Separator): This is to prohibit data
transmission between each wireless client stations.
Enable 802.11d: This is to prevent network loop applying to the spanning tree
standard. This option can be found under the “Advanced Wireless Settings”
4.4 WDS Specific Settings
In this mode, 2 access points in two remote locations connect to each other to provide a
wireless bridge between 2 remote LANs. It is mostly used by enterprise to connect 2 remote
office’s network together. The bridge modes are connected by using the WDS (Wireless
Distribution System) technology.
In this section, we will talk about the WDS Settings which is available only in WDS Bridge
(Pure MAC) mode. WDS Bridges are using BSSID (AP’s Wireless MAC address) to
authenticate each other. Therefore, it is necessary to know the remote Bridge’s wireless
MAC addresses. You can always do a “Site Survey” to find out the MAC Addresses.
Local Area Network Local Area Network
WDS Bridge