AirLive AirMax DUO - Manual (Page 33)

3. Configuring the AirMax DUO
25 AirLive AirMax DUO User’s Manual
Note: Before you starting hardware connection, you are advised to find an appropriate
location to place the Access Point. Usually, the best place for the Access Point is at the
center of your wireless network, with line of straight to all your wireless stations. Also,
remember to adjust the antenna; usually the higher the antenna is placed; the better will be
the performance.
3.2 Prepare Your PC
The AirMax DUO can be managed remotely by a PC through either the wired or wireless
network. The default IP address of the AirMax DUO is 192.168.1.1 with a subnet mask of
255.255.255.0. This means the IP address of the PC should be in the range of 192.168.1.2
to 192.168.1.254.
To prepare your PC for management with the AirMax DUO, please do the following:
1. Connect your PC directly to the LAN port on the DC Injector of AirMax DUO
2. Set your PC’s IP address manually to 192.168.1.100 (or other address in the same
subnet)
You are ready now to configure the AirMax DUO using your PC.