AirLive AirMax DUO - Manual (Page 159)

7. Command Line Interface
151 AirLive AirMax DUO User’s Manual
7.2 Debugging Commands
Those debugging commands are commands used for manufacturing testing process. If a
z_debug command looks similar to a Set command, please use the Set command instead.
z_debug http logout
Purpose: log out HTTP
Example:
Command> z_debug http logout
z_debug signature
Purpose: Enable or disable signature check on firmware
Example:
Command> z_debug signature disable
Are you sure ? ( y/n ) : y
Signature check is now DISABLED!!!
z_debug add ssid
Purpose: This command will replace the default ssid with the new one. It
will not add an additional SSID. We recommend to use the following
commands instead:
add ssid broadcast (enable/disable) to add a new SSID
set ssid to replace the current ssid name with a new one
Example:
Command> z_debug add ssid air1
z_debug reboot
Purpose: reboot your AirMax DUO
Example:
Command> z_debug reboot
Rebooting...