AirLive AirMax DUO - Manual (Page 43)

3. Configuring the AirMax DUO
35 AirLive AirMax DUO User’s Manual
3.4.2 Welcome Screen and Login
After the procedure above, the Welcome Screen will appear. Welcome Screen gives a brief
introduction of the AirMax DUO’s main function category. By clicking on the function
category, it will direct you to the corresponding web management menu.
Wireless Settings: Click on this part will bring you to the wireless operation mode
menu. The AirMax DUO’s wireless settings are different between wireless modes.
Only functions that are applicable to the wireless mode will show to simplify
configuration. For example, multiple SSID option is only workable for Access Point and
AP Router mode. Therefore, the function will only appear in these 2 modes. For this
reason, the first step to configure the AirMax DUO is to select the wireless mode. The
router mode specific functions are also in this menu category. For explanation of
different wireless modes, please refer to Chapter 1.
System Configuration: All non-wireless and router mode settings are in this category.
The system configurations including changing password, upload firmware, backup
configuration, settings PING watchdog, and setting management interface. The default
management timeout is 10 minutes; we recommend you should change password and
management timeout during the first time login.
Tools: Discover network status using ping, traceroute tools.
Device Status: This section for monitoring the status of AirMax DUO. It provides
information on device status, Ethernet status, wireless status, wireless client table, and
system log.