2N PRI Gateways - User Manual - Manual (Page 95)

!! Preliminary version of user guide v1.8 !!
!! Preliminary version of user guide v1.8 !!
93
12.1.5. Command Shell Statuses
Command Shell Statuses
ID Name
Description
0 IDLE Rest status, awaiting AT commands
1 REQUEST Communication with GSM module upon AT&G command is
displayed
2 REPORT Active tracing
3 LOGFILE Content of log file is being written out
4 CALLFILE Content of call file is being written out
5
CALLREAD Call file records are read
6
AUTOFILE Content of incoming call autorouting chart is being written out
7
QUERY
(not used so far)
8
SCREEN
(not used so far)
9
MATRIX
Active matrix screensaver
10
FUNCFILE Content of debug file is being written out
11
LCRFILE
(not used so far)
Telnet Layer Statuses
ID Name
Description
0
LOGOUT User logged-out
1
LOGIN
User is entering name
2
PASSW
User is entering password
3 IDLE User logged-in
12.1.6. Records of Events and Calls
Record Type in Log File
ID Name
Description
0
POWER
System power on, power off or reset
1
INIT
Initialization of EEPROM (configuration) or flash (upgrade)
2
HW-ERR HW error of plugged-in board
3
SYSERR System error (memory error, etc.)
4
BRDIN
Board plugged-in
5
BRDOUT Board plugged-out
6 BRDRES Board reset using AT!B command
8 L1-ERR PRI port layer 1 error (ISDN1)
9 L2-ERR PRI port layer 2 error (ISDN2)
10 L3-ERR PRI port layer 3 error (ISDN3)
12 G2-ERR GSM module layer 2 error (gate2)
13 G3-ERR GSM module layer 3 error (gate3)
14 C4-ERR Link layer error (call4)
Record Type in Call File
ID Name
Description
0 I-FD Not connected incoming call attempt
1 I-OK Connected incoming call
8
O-FD
Not connected outgoing call attempt
9
O-OK
Connected outgoing call