2N PRI Gateways - User Manual - Manual (Page 69)

!! Preliminary version of user guide v1.8 !!
!! Preliminary version of user guide v1.8 !!
67
- Cause transfer – List of numbers of releases causes which the PRIGW receive from GSM
networks and which have to be translated to different causes to ISDN PRI interface.
- Allow delete of statistics on PRI every month - Allow/Restrict automatic reset of PRI statistic
every x. day in month.
- Digits count in SETUP – Sets how many digits will be send in SETUP message (in case of
outgoing call), the others digits will be send in OVERLAP mode.
Example: called party number : 6012345678 , digits count in SETUP = 7
Outgoing signalization messages:
SETUP (contains 6012345)
INFO (6)
INFO (7)
INFO (8)
- Dial tone to NT interface on empty SETUP – With activated this feature, the gateway will send
dial tone in case that receive SETUP message without called party number
- Ring tone – Select type of ring tone in case that there is no open B-channel to GSM/3G network.
- Numbering plan settings – Parameters for set correct numbering plan pro Called and Calling
party number (default is 0 = unknown)
- Hungarian tone after 2 digits – special feature for Hungary, gateway will send specifics dial tone
after it receive tow digits.
- Generate disconnect tone to PRI (s) – In case of reject a call, gateway will generate busy tone
for defined time, then call will be correctly terminated.