2N PRI Gateways - User Manual User Manual
Page 89

!! Preliminary version of user guide v1.8 !!
!! Preliminary version of user guide v1.8 !!
87
atms,atfs – transit, receive gain (3=+5db, 1=+2.5db, 0=0db,
2=-2.5db, 4=-5d
AT%G02=mode,atms,atfs
Voice processing settings (for TC35 GSM
modules only)
mode – algorithm (2-echo canceller)
atms,atfs – transit, receive gain (3=+5db, 1=+2.5db, 0=0db,
2=-2.5db, 4=-5d
AT%G06=mmdd,…mmdd…
List of holiday days (mm-month;dd-day) max
length of line is 63 chars!
AT%G07=mmdd,…mmdd
Net list of holiday days
AT%G08=delay,min,max,tout
Parameters of dial from ISDN to GSM
delay– relax delay between calls
min – minimal length of number dialed from ISDN
max – maximal length of number dialed from ISDN
tout – delay between dial digits
GSM settings (x-GSM group)
AT%G#0=sim
Mode of switching SIM card
sim>
0- OFF – group is turn-off
1-4 – SIM card no. 1-4
5 – switching by time
6 – switching by random time
AT%G#1=netid,clir,min,sms,se
c,sec2,pseudo
Basic parameters of SIM card in slot 1
netid-network number
clir – 0=default,1=enabled,2=disabled
min – maximal number of minutes called
sms – maximal number of SMS sent
sec – min length of call (no for cdr info)
sec2 – accuracy of measurement length of call (no for cdr
info)
pseudo – default = 0
AT%G#2=netid,clir,min,sms,se
c,sec2,pseudo
Basic parameters of SIM card in slot 2
AT%G#3=netid,clir,min,sms,se
c,sec2,pseudo
Basic parameters of SIM card in slot 3
AT%G#4=netid,clir,min,sms,se
c,sec2,pseudo
Basic parameters of SIM card in slot 4
AT%G#5= from/to[/from,to/w+] Time intervals for use SIM card in slot 1, one or
two intervals (from=to=hh:mm), w+(w-) parameter
„w+“ (all weekend) or „w-„ (no weekend) for
enabled/disabled SIM on weekends. In case that
AT%G#0=6 from/to= min/max limit for generate
random time for switch SIM.
AT%G#6= from/to[/from,to/w+] Time intervals for use SIM card in slot 2
AT%G#7= from/to[/from,to/w+] Time intervals for use SIM card in slot 3
AT%G#8= from/to[/from,to/w+] Time intervals for use SIM card in slot 4
List of Networks
AT%N#0=op/np,…
op/np
List of prefixes replaced by new prefixes (#-number of netlist;
op-old prefix;np-new prefix)
AT%N#1=pr/n,…pr List of prefix dialed for ISDN (will be use for LCR table)