2N PRI Gateways - User Manual User Manual

Page 56

GSM board – includes information on statuses and types of GSM modules on the GSM board.
-

Board type – type of GSM board

Layer 2,3 – status of the module communication layers.

GSM network – name of the network the module is currently logged in.

Network ID – ID number of the network

(MCC+MNC)

the module is currently logged in.

GSM cell – identification number of the GSM cell the module is currently logged into. .

Description of displayed numbers:

NETCELL: A,BBB,CCC,DDDDD

A = status :

0 - not registered

1 - registered to home network

2 - not registered, but ME is searching for a new operator

3 - registration denied

4 - unknown

5 - registered to roaming network

BBB = first byte of LAC (location area code) in dec format

CCC = second byte of LAC in dec format

DDDDD = cell ID

GSM group – number of actual GSM group.

Active SIM – Number of active SIM card on this GSM module.

Module ID - International identification number of the GSM module (IMEI).

Rev ID – GSM module firmware revision number.

SIM Number – SIM card serial number.

ID SIM card– International identification number (IMSI) or SIM serial number (SCID) of SIM
card.

Signal intensity – the current signal level in the network the module is logged in (minimum
value = -113 db – the module is logged out).

Sleep button – used for conversion of selected desk into sleep mode

Block button – block of selected GSM module (unavailable for outgoing and incoming
calls).

Down button – used for block the module after end of proceeding call

Reset button – hardware reset of board, or GSM module