2N PRI Gateways - User Manual - Manual (Page 38)

36
7.6.3. VoIP Board Configuration (Web Interface)
While configuring the system using the web interface keep the default values of the following
parameters.
Trunk configuration:
Protocol type =
E1 TRANSPARENT 30
Clock master = Recovered
Framing metod = SUPERFRAME
Line code = HDB3
Control protocol configuration:
Control protocol type =
MGCP
Call agent IP = IP address of CPU card (default 10.1.10.15)
Call agent port =
5060
Profile =
NORMAL
!!! PLEASE MAKE CHANGE ONLY IP CONFIGURATION PARAMETERS AND CALL AGENT
IP ADDRESS. CHANGING THE OTHERS PARAMETERS MAY CAUSE BAD FUNCTION OF
THE VOIP BOARD !!!