Echo 77412 Owners Manual v.3 - Manual (Page 13)

Crary Bear Cat Owners Manual 11
ASSEMBLY
WARNING
To avoid sparks and a possible explosion or fire due to a
short circuit:
Do not touch the positive (+) battery terminal and any
surrounding metal with tools, jewelry or other metal
objects.
When installing battery cables, connect the positive (+) cable
first and the negative (-) cable last.
2.4 ATTACHING THE CHIPPER CHUTE
MODELS: ALL MODELS
Attach the chipper chute to the chipper housing using four 3/8"
x 1" bolts, 3/8" washers and locknuts (Figure 2.11). Use two
bolts on each side .
Figure 2.11 - Chipper Chute
2.5 ATTACHING THE CHIPPER CHUTE
EXTENSION
MODELS: 77412S, 77413S
Attach the chipper chute extension to the chipper chute using
six 3/8" x 1" carriage bolts, 3/8" washers and 3/8" nuts (Figure
2.12). Use three bolts on each side.
Chipper Chute
Extension
Chipper Chute
3/8" x 1" bolts and
locknuts
Figure 2.12 - Chipper Chute Extension
2.6 INSTALLING THE BATTERY
MODELS: 77412,77412S, 77413, 77413S
The machine may or may not have been shipped with a battery
depending on your area. If you did not receive a battery with
your machine, you will need to purchase one.
Use a battery that meets or exceeds the following
specifications:
Battery Category, Lawn and Garden
BCI Group Size U1
200-250 CCA
7-3/4" X 5-3/16" X 7-5/16"
Suggested Source:
Exide Cutting Edge, Type GT-H
After purchasing your battery, fill, charge and install the battery
according to the battery owners manual.