Configuring bury time products, The configuration menu item – BURY Time Suite User Manual

Page 29

Configuring BURY Time Products

17. The Configuration menu item

In addition to the previously described menu items of

Backup database

Restore database

and

Connect to UNI CarTalk Time card

, in the

Configuration

section you can find additional menu

items:

Device configuration

Under this menu item, it is possible to select and initialise the connected BURY Time products / SD
cards. Under

FW Version

, in the details which open, you are able to recognise the version of the

firmware which is installed on the selected product.

Every BURY Time product is equipped with a buzzer. In the sub-item of

Volume Level

, you are able

to set the intensity of the buzzer (only available for the CL 1010 Time).

Under

Default mode

, you set the mode which is to be active when you start the BURY Time product.

Here, the choice is between the tour types of „Private“, „To work“, „Business“ or the „Last mode“.

For the BURY Time products that are equipped with light diodes, you are able to set either permanent
or one-off

Mode signalling

. If this is only displayed once, the LEDs switch off after approx. 10 se-

conds. The LEDs only illuminate again in the event of a change to the tour type or the restarting of the
vehicle. You are able to extend the signalling phase to up to 60 seconds.

If you would like to be informed as to whether GPS signals are received at the beginning of the tour,
then you are able to activate the corresponding notification:

enable sound if GPS fixed

. At the same

time, you are also able to specify the time span as to from when you would like to be informed if no
GPS signal is received any more.

If you have enabled and installed the

Danger zones

function for the BURY Time product, then the

buzzer signalises those zones if you approach them. You are also able to deactivate the signal, howe-
ver, or change the acoustic tone of the signal.

The last piece of information tells you whether the danger zones are installed on the BURY Time pro-
duct and if yes, the date from which they originate.

Danger zones

If you click on this menu item, a separate window opens with a wizard who guides you through the
subsequent steps.

Important:

Please comply with the country-specific laws and regulations if you want to use this function.