BURY Time Suite User Manual

Page 11

If a vehicle is used by several drivers (e.g. in the family or in fleets), these can be entered under Dri-
vers. The

drivers

, however, are not programme users, and can therefore not manage their journeys

themselves.

Various

Journey reasons

can be entered under the same menu item. This is an advantage if the

journey is made regularly, e.g. journeys to customers, service trips, commuting trips etc.

Menu items in the configuration section

In this menu, the functional scope is dependent on several factors. The menu item

Backup database

and

Restore database

can only be used and viewed if you have administrator rights. With both of

these functions, you can save your data on a separate drive at any time and recopy any lost data.

The other menu items can only be used when the corresponding BURY product is connected to the PC
using an USB cable or an SD card with position data.

Device configuration

you can, for example, define the standard journey type. This is then auto-

matically set when the power supply to the system in the vehicle is established (ignition/engine on).

Clicking on

Danger zones

, brings up a new window. Here you can play a file on your BURY product

or the SD card, in which more than 25,000 danger zones are saved for the whole of Europe. If the file
is available on the BURY product, a warning function is automatically activated in front of these loca-
tions.

Using the

Factory reset

menu item, you can delete the entire memory of connected BURY system or

the SD card. This should be carried out after the data is read for the driver’s log and in the case that
the system is used in a new vehicle.

With the

Firmware update

menu item, you can update the connected BURY system. In the event

that an SD card is connected, the new firmware is stored to this and the system is later updated in the
vehicle.

If you would like to read data from an SD card, the administrative programme must first be notified of
the drive. This can be carried out in the next menu item

Connect to UNI CarTalk Time card