BURY Time Suite - Manual (Page 19)

19
13. Importing positional data
In the BURY Time Suite, it is possible to load positional data from three electronic driver’s logbooks.
The differing work steps are described below for all of the products. Please proceed as follows:
How to use the CC 9060 Time
1) Remove the CC 9060 Time monitor from your vehicle and note down the number of kilometres/mi-
leage.
2) Start the BURY Time Suite on your PC.
3) Connect the CC 9060 Time monitor to your PC via USB cable.
The automatic data import will start.
4) Select a user, if several have already been created.
5) Select a vehicle if several have already been created, or create a vehicle now.
6) Now select a driver if several have already been created, or create a new driver now.
7) Enter the current number of kilometres/mileage of the vehicle.
8) Now click on
Import data .
How to use the CL 1010 Time
1) Remove the CL 1010 Time from your vehicle and note down the number of kilometres/mileage.
2) Start the BURY Time Suite on your PC.
3) Connect the CL 1010 Time to your PC via USB cable.
The automatic data import will start.
4) Select a user, if several have already been created.
5) Select a vehicle if several have already been created, or create a vehicle now.
6) Now select a driver if several have already been created, or create a new driver now.
7) Enter the current number of kilometres/mileage of the vehicle.
8) Now click on
Import data .
Creating a driver’s logbook