BURY Time Suite - Manual (Page 20)

20
Creating a driver’s logbook
How to use the UNI CarTalk Time
1) Remove the Micro-SD card from the UNI CarTalk Time hang-up cup and note down the number of
kilometres/mileage.
2) Start the BURY Time Suite on your PC.
3a) Plug the Micro-SD card into a suitable card reader and connect it with your PC.
3b) Put the Micro-SD card in the SD card adaptor which is provided, plug these into a suitable card
reader and connect them with your PC.
4) Open the menu item configuration and click on
Connect to UNI CarTalk Time card .
5) Select the correct card if several are displayed. Then click on Connect .
6) Select a user if several have already been created.
7) Select a vehicle if several have already been created, or create a vehicle now.
8) Now select a driver if several have already been created, or create a new driver now.
9) Enter the current number of kilometres/mileage of the vehicle.
10) Now click on
Import data .