BURY Time Suite - Manual (Page 23)

23
What occurs in the BURY Time Suite:
If you enter a number of kilometres/mileage which is fractionally smaller than that of the number of
kilometres/mileage which is saved in the BURY Time Product, then your tours will be created with a low
minus correction value and you can then create a driver’s logbook with it.
If the entered value deviates very much from the number of kilometres/mileage on the device, then
you will receive a corresponding message. If you read in the data in spite of this, it may be the case
that all of the tours are given a very high correction value and it is possible that the kilometres driven
can no longer be displayed. A driver‘s logbook of this kind would not be useable.
Important:
The importing of data from many tours can take a few seconds. During the importing function, X
do not remove the Micro-SD card from the card reader or the USB connector of the adaptor cable
from the PC or the device.
14. Changing the positional data
If the positional data has been successfully read in, the Data import window will close. The data will
now be compared with the map material stored in the BURY Time Suite and converted into exact
address data. It may occur, however, that certain positions are not recognised. These have to be added
by you manually. Open the
Logbook menu item and then click on Processing routes in order to
start editing the tours.