JLG 800A_AJ ANSI Service Manual - Manual (Page 369)

SECTION 6 - JLG CONTROL SYSTEM (S/N 0300065534 TO PRESENT)
3120740 – JLG Lift – 6-39
6.9 MACHINE PERSONALITY SETTINGS
NOTE: Personality settings can be adjusted within the
adjustment range in order to achieve optimum
machine performance.
Table 6-6. Personality Ranges/Defaults
FUNCTION PERSONALITY RANGE DEFAULTS
DRIVE ACCELeration 0.1 to 5.0s 2.0
DECELeration 0.1 to 3.0s 2.0
FORward MINimum speed 0 to 25% 4
FORward MAXimum speed 0 to 100% 30
REVerse MINimum speed 0 to 35% 4
REVerse MAXimum speed 0 to 100% 30
ELEVATED MAXimum speed 0 to 50% 15
CREEP MAXimum speed 0 to 45% 20
Engine RPM 800 to 2900 1800
TOWER LIFT ACCELeration 0.1 to 5.0s 1.5
DECELeration 0.1 to 3.0 0.5
MlNimum UP speed 0 to 60% 39
MAXimum UP speed 0 to 100 100
MINimum DOWN speed 0 to 60 38
MAXimum DOWN speed 0 to 100 100
Engine RPM 800 to 2900 1800
UPPER LIFT ACCELeration 0.1 to 5.0 2.5
DECELeration 0.1 to 3.0 0.7
MlNimum UP speed 0 to 60% 30
MAXimum UP speed 0 to 100 67
CREEP Maximum UP speed 0 to 65 55
MINimum DOWN speed 0 to 60 45
MAXimum DOWN speed 0 to 100 76
CREEP maximum DOWN speed 0 to 75 55
Engine RPM 800 to 2900 1800