Eppendorf Varispenser 4962 - Manual (Page 32)

26
7. Assembling the Instrument
7.1. Connecting the telescopic filling tube
– Adjust the length of the filling tube
according to the bottle to be used.
– For Varispensers 1, 2,5, 5 and 10 ml
push the smaller diameter end of
the filling tube onto the filling valve
(10) as far as possible.
For Varispensers 25, 50 and 100 ml
push the larger diameter end of the
filling tube onto the filling valve.
– Cut the lower end of the filling tube
at an angle.
Note: Be careful not to bend the tube.
If the bottle is shorter than the filling
tube, separate the two sections and cut
the appropriate piece to the necessary
length.