Eppendorf Wall mount for Multipette Xstream User Manual
1wall mount, 2mounting the wall mount, 3cleaning the wall mount
Instructions for use
Wall mount
English (EN)
Instructions for use
Wall mount
see
on p.
Fig.
Tab.
p.
English (EN)
Instructions for use
1
Wall mount
Abb. 1-1: Wall mount for Multipette
®
(X)stream/Repeater
®
(X)stream
Fig. 1-1:
Wall mount for Multipette
®
(X)stream/Repeater
®
(X)stream
Abb. 1-2: Wall mount for Eppendorf Xplorer
®
/Xplorer
®
plus
Fig. 1-2:
Wall mount for Eppendorf Xplorer
®
/Xplorer
®
plus
2
Mounting the wall mount
1. Clean glass or ceramic surfaces (e.g., with ethanol) and allow them to dry.
2. Remove protective film and firmly press the wall mount against the cleaned
surfaces.
Objects may only be placed in the wall mount after 24 hours.
3
Cleaning the wall mount
Use a damp cloth and mild cleaning agent to wipe off contamination.
4
Removing the wall mount
Rotate the wall mount and remove adhesive tape.