Eppendorf 5430 R Centrifuge - Manual (Page 29)

Operation
Centrifuge 5430/5430 R
English (EN)
29
Abb. 5-2: Display of the Centrifuge 5430/5430 R
Fig. 5-2: Display of the Centrifuge 5430/5430 R
Please also read the precise description of the individual functions (see p. 47).
5.2 Menu navigation
The menu consists of two levels. To change settings, generally proceed as follows.
1 Program number (if enabled)
2 Status of the function At set rpm
: Start of operation when reaching 95% of the
preset g-force (rcf) or speed.
: Start of run time immediately.
3 Status of the key lock
: Centrifuging parameters cannot be modified
unintentionally.
: No key lock.
4 Status of the loudspeaker
: Switched on.
: Switched off.
5 Status of the centrifuge
: Centrifuge lid unlocked.
: Centrifuge lid locked.
(flashing): Centrifuging in progress.
6 Temperature control cycle programming (only
5430 R)
: Fast Temp pro is enabled, i.e., start time
and temperature of the temperature control run
have been programmed (see p. 37).
7 Time
8 Soft ramp
: Rotor accelerates and brakes slowly.
No symbol: Rotor accelerates and brakes rapidly.
9 Standard display
10 Extended display (if enabled)
11 g-force/speed
12 Temperature (only 5430 R)
13 Centrifuging duration
1. Open menu.
1 2 3 4 5 7 6
8
10
9
11 12 13