Eppendorf BioSpectrometer basic - Manual (Page 27)

27
Operation
Eppendorf BioSpectrometer ® basic
English (EN)
5.3.2.4 Measuring samples
5.3.2.5 Finalizing the method
5.3.2.6 Optional: process results
 The sample key is used for measuring your
samples consecutively.
Blank results will remain saved for the duration of
one series of measurement. However, a new blank
measurement always is possible. (The adjacent
figure shows a measuring procedure with
evaluation via the standard curve and, in addition
to the sample result, the graph of the standard
evaluation.)
1. Press [Finish], to complete the measuring series
and return to the method selection.
2. After all measurements have been completed,
switch off the device and close the cuvette shaft
cover to protect the cuvette shaft from
contamination.
For some methods, you can postprocess the results
in the
process results method step. For example,
you can use the SpectraZoom zoom function in the
spectra.
 Use the and cursor keys for selecting
systematically any results of the series of
measurement for postprocessing.